Technical library
Small findings, clearly documented.
Browse public notes from routine laboratory checks, method comparisons, field-support work, and completed participant studies.
- Public items
- 14
- Technical notes
- 13
- Archive span
- 1987–2026
- Disciplines
- 08
Public register
Technical notes and study summaries.
These short publications share bounded observations and practical method findings. They are written for context, not as product certifications or client reports.
Showing 14 of 14 public itemsNewest technical notes shown first
- CompleteSmall-Sensor Display AgreementThe study showed that side-by-side consumer displays can be compared consistently using fixed categories for settling time and agreement. It did not assess accuracy, rank products, or certify individual devices.Industrial InstrumentationCompleted study summary
- 2026Portable Temperature Probe Verification CycleRoutine comparison of two portable temperature probes against an in-date reference at three operating points; both units remained within the stated tolerance.Industrial InstrumentationTechnical note
- 2022Eyewash Inspection Route Timing ReviewA timed review of the routine eyewash inspection sequence found the existing checklist complete; the order of two checks was reversed to reduce backtracking.Laboratory Safety SystemsTechnical note
- 2019Anti-Static Work-Surface Resistance SurveyScheduled resistance measurements across general anti-static work surfaces identified two maintenance actions and no out-of-service areas.Laboratory Safety SystemsTechnical note
- 2013Fine-Aggregate Moisture Correction TrialMass-based moisture corrections were compared with the routine field estimate for fine aggregate; the simplified correction remained suitable for screening work.Advanced MaterialsTechnical note
- 2009Sample-Label Adhesion Under Refrigerated StorageThree label stocks were observed through refrigerated storage and condensation cycles; one adhesive was removed from the approved list.Environmental AnalysisTechnical note
- 2005Bench Power-Supply Load-Regulation VerificationTwo bench supplies were checked at stepped loads against the reference meter; output regulation remained within the maintenance tolerance.Industrial InstrumentationTechnical note
- 2001Portable pH Meter Warm-Up Stability CheckWarm-up drift was recorded for three portable pH meters before routine use; a ten-minute stabilization interval was retained.Environmental AnalysisTechnical note
- 2000Fastener Torque-Mark Visibility TrialTorque-mark visibility was compared under ordinary bench lighting and after handling; the wider mark remained most consistently readable.Prototype EvaluationTechnical note
- 1999Duplicate Field-Notebook Legibility ReviewA legibility review of original and duplicate field sheets found the existing writing-pressure guidance adequate after minor layout changes.Field Sampling & Geological ResearchTechnical note
- 1993Low-Frequency Bench Vibration SurveyRelative vibration measurements at three bench positions established a routine daytime baseline for instrument setup.Applied PhysicsTechnical note
- 1989Chart Recorder Weekly Linearity CheckFive-point checks of two chart recorders found no material departure from the reference signal over the selected operating range.Industrial InstrumentationTechnical note
- 1988Sample Intake Label Reconciliation ReviewA review of mock sample packets compared container, log, and worksheet identifiers; a two-person check removed observed transcription discrepancies.Contract ResearchTechnical note
- 1987Ambient-Cure Sealant Observation SeriesBench observations compared tack-free and final cure intervals for three development batches; all remained inside the then-current working range.Advanced MaterialsTechnical note
No public items match those filters. Try a broader search or another discipline.
Related work
See the methods behind the library.
Explore our research capabilities and participant studies, or contact us if you have a question about a public note.